Download Print this page
EarthWay M80ECM Operation And Assembly Manual

EarthWay M80ECM Operation And Assembly Manual

12-volt broadcast spreader

Advertisement

Quick Links

Operation and Assembly Manual
for the
EarthWay
M80ECM
®
12-volt Broadcast Spreader
5-Year LIMITeD WarraNTY
EarthWay Products, Inc. warrants this product free of defects in original workmanship and materials for a period of
5-Years to the end user with the original purchase receipt. If a manufacturing non-conformance is found, EarthWay
Products, Inc. at its discretion will repair or replace the part(s) or product at no charge provided the failure is not the
result of incorrect installation, mishandling, misuse, tampering, or normal wear and tear as determined by EarthWay .
EarthWay at its discretion may require that the part(s) or product be returned along with the original purchase receipt
at owners' expense for examination and compliance with the terms of this warranty. (Do not return any product without
first receiving authorization from EarthWay Products, Inc.). To seek remedy under this warranty, contact EarthWay
Products, Inc. at 574-848-7491, techsupport@earthway.com or write to ( EarthWay Products, Inc. P.O. Box 547
Bristol, Indiana 46507) and describe the nature of the manufacturing defect. SPECIFIC LIMITATIONS: This warranty
covers only the part(s) or product; any labor charges associated with repair or replacement of non-conformances are
specifically excluded. Due to the corrosive nature of most fertilizers and ice melt products, EarthWay Products, Inc.
makes no warranty against and specifically excludes part(s) or product degradation or failure due to corrosion or its
effects. Clean and dry your spreader thoroughly after each use, as a preventative measure, coat all metal parts with a
light oil or silicon spray.
Part # 52219

Advertisement

loading

Summary of Contents for EarthWay M80ECM

  • Page 1 EarthWay . EarthWay at its discretion may require that the part(s) or product be returned along with the original purchase receipt at owners’ expense for examination and compliance with the terms of this warranty. (Do not return any product without first receiving authorization from EarthWay Products, Inc.).
  • Page 2: Mounting Instructions

    EarthWay ® Electric Spreaders Models M80 Always wear protective clothing, eye wear, and dust mask to prevent contact with chemicals and other materials being applied with this machine. Remove any material in the hopper before lifting or detaching this machine from the vehicle.
  • Page 3 Mounting Systems - user fabricated EarthWay recommends that the M80 be mounted into the bed of a vehicle or to a secure horizontal or vertical surface capable of holding a 500lb. weight. The hole location & dimensions are for reference when construct- ing your mount.
  • Page 4: Operating Instructions

    CALIBRATION INSTRUCTIONS: Step 3  Loosen set-screw on Calibration Install Calibration Bracket to ECM shaft by sliding the Calibration Bracket Motor Bracket on to the ECM shaft. Connection  Set adjustment dial to “0” Closed  Activate switch to extend to the “STOP”...
  • Page 5 Calibrating Bracket 36101 Stainless Steel Hair Pin Clip 31103 #6 X 1/2” TYPE 25 HWHS ZINC 53226 Vinyl EarthWay Logo 41260 M80ECM Mounting Bracket 77059 ECM Assembly 12315 Square Debris Screen 12278 New Pro Shut-Off Plate 19170 Washout Port Cap 36210 1/4-20 x 1”...
  • Page 6: Ec Declaration Of Conformity

    EC Council Directives concerned with Machinery and Electromagnetic Compatibility. No alterations are to be made to the machine without prior consultation and approval of EarthWay Products, Inc. otherwise the Declaration may become invalid. This equipment must be commissioned, used and maintained strictly in accordance with the operating and maintenance instructions issued with the machine.