Comdial X34PT User Manual page 33

Autodial Programming (continued)
Programming Outside Numbers (continued)
l
If your system is behind a host system that needs a
hookflash to access a feature, press the TAP button. Then,
continue dialing.
5. To continue storing, press the TRANWCONP button and
repeat steps 2-4.
6. Press SPKR to end.
0
You can store a number under a DSS button. Just repeat
steps l-6, using the programmable button mentioned in
step 2.
Programming Outside Numbers Using Line Groups
Line groups are represented as 1,2,3, and 4 on the keypad. The
table below shows the line group and its corresponding keypad
number.
To store a number using a line group:
1. Press @Baa.
2. Press programmable button you want for storage.
3. Press either 1 (9), 2 (Sl), 3 (82), or 4 (83) on the keypad.
4. Dial the number you are storing.
5. To store another number, press the TRANS/CONP button
and repeat steps 2-4.
!
6. Press SPKR to end.
0
30
.;..
':'-
;:'
:
; ...
_!'
:
Continued on next page . . .