Table of Contents
Advertisement
User's Manual of GSW-2400HPS
5.5 Auto-Negotiation
The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible bandwidth
when a connection is established with another network device (usually at Power On or Reset). This is done by detecting the
modes and speeds in the second of both devices which are connected and capable of. Both 10Base-T and 100Base-TX devices
can be connected with the port in either half- or full-duplex mode. 1000Base-T can be only connected in full-duplex mode.
83
Advertisement
Table of Contents
