Table of Contents
Advertisement
This section describes the hardware features and installation of the Web Smart Switch on the desktop or rack mount. For easier
management and control of the Web Smart Switch, familiarize yourself with its display indicators, and ports. Front panel
illustrations in this chapter display the unit LED indicators. Before connecting any network device to the Web Smart Switch,
please read this chapter completely.
2.1 Hardware Description
2.1.1 Switch Front Panel
The unit front panel provides a simple interface monitoring the switch.
Switch.
GSW-2400HPS Front Panel
■ Gigabit TP Interface (802.3af / 802.3at PoE Injector)
10/100/1000Base-T Copper, RJ-45 Twist-Pair: Up to 100 meters.
■ Reset Button
In the middle of the front panel, the reset button is designed for reset and reboots the Web Smart Switch without turning off
and on the power. The following is the summary table of Reset button
Reset Button Pressed and Released
> 5 sec: Factory Default
Figure 2-1: GSW-2400HPS Front Panel
Function
Reset the Web Smart Switch to Factory Default configuration.
The Web Smart Switch will then reboot and load the default
settings as below:
。
Default Username: admin
。
Default Password: admin
。
Default IP address: 192.168.0.100
。
Subnet mask: 255.255.255.0
。
Default Gateway: 192.168.0.254
13
User's Manual of GSW-2400HPS
2. INSTALLATION
Figure 2-1
shows the front panel of the Web Smart
function:
Advertisement
Table of Contents
