Harris Atlas DVL400 Technical Manual page 50

Section 2 Installation / Initial Turn-On
•
Press SYSTEM then SYSTEM COOLING. This screen is shown in
Figure 3-32 on page 3-28.
•
Select manual pump switching. Button should display MANUAL
ENABLED.
•
Press pump select button for PUMP A ON then PUMP B ON. The pumps
should switch. This is indicated in the transmitter GUI screen, as well as
in the Cooling Control Panel status LED indicators.
2-20
WARNING: Disconnect primary power prior to servicing.
888-2473-001
ATLAS Series™
2/25/03