Harris Atlas DVL400 Technical Manual page 2

Damaged or undamaged equipment should not be returned unless written approval
and a Return Authorisation is received from HARRIS CORPORATION, Broadcast
Communications Division. Special shipping instructions and coding will be
provided to assure proper handling. Complete details regarding circumstances and
reasons for return are to be included in the request for return. Custom equipment or
special order equipment is not returnable. In those instances where return or
exchange of equipment is at the request of the customer, or convenience of the
customer, a restocking fee will be charged. All returns will be sent freight prepaid
and properly insured by the customer. When communicating with HARRIS
CORPORATION, Broadcast Communications Division, specify the HARRIS
Order Number or Invoice Number.
Carefully unpack the equipment and preform a visual inspection to determine that
no apparent damage was incurred during shipment. Retain the shipping materials
until it has been determined that all received equipment is not damaged. Locate and
retain all PACKING CHECK LISTs. Use the PACKING CHECK LIST to help
locate and identify any components or assemblies which are removed for shipping
and must be reinstalled. Also remove any shipping supports, straps, and packing
materials prior to initial turn on.
Technical Assistance and/or Replaceable Parts Service
Replacement parts are available from the HARRIS Service Parts Department.
Telephone 44 (0) 1223 245115 to contact the service parts department or address
correspondence to Service Parts Department, Broadcast Communications Division,
P.O. Box 41, 515 Coldhams Lane, Cambridge England. The HARRIS factory may
also be contacted through a FAX facility 44 (0) 1223 411370
NOTE:
The # symbol used in the parts list means used with (e.g. #C001 =
used with C001).
Returns And Exchanges
Unpacking