Engine Hatch Hydraulic Lift System (If Equipped) - Maxum 2500 SE Sport Cruiser Owner's Manual Supplement

Engine Hatch Hydraulic Lift System (If Equipped)

PERSONAL INJURY and/or PRODUCT or PROPERTY DAMAGE HAZARD!
In case the hydraulic lift system fails, put the engine hatch support rod in place BEFORE
working in the engine compartment.
• Remove any items from the top of the engine hatch BEFORE Opening.
• Close all entertainment center doors and hatches BEFORE Opening and/or Closing the
engine hatch.
• The engine hatch's hydraulic
lift pump is controlled by a
toggle switch at the helm.
• Periodically (at least once a
year) check the fluid level in
the hydraulic fluid reservoir
and refill as needed. For the
location of the hydraulic fluid
reservoir, see the Component
Locations section in Chapter 2
of this supplement.
To lift the engine hatch:
1. Lift the toggle switch Up to raise the
engine hatch.
2. Put the engine hatch support rod in
place.
• To lower the engine hatch, remove
the engine hatch support rod and
press the toggle switch down.
! WARNING!
NOTICE
Chapter 3: Propulsion & Related Systems
31