Access The Rj-45 Console Port With A Db-9 Adapter; Accessing The Usb-B Console Port - Dell Z9000 Manual

Access the RJ-45 Console Port with a DB-9 Adapter

If the DTE has a DB-9 interface, you can connect to the console using an RJ-45 to DB-9 adapter along
with the RJ-45 rollover cable.
The following table lists the pin assignments.
Table 1. Pin Assignments Between the Console and a DTE Terminal Server
Console Port RJ-45 to RJ-45
Rollover Cable
Signal RJ-45 Pinout
RTS 1
NC 2
TxD 3
GND 4
GND 5
RxD 6
NC 7
CTS 8

Accessing the USB-B Console Port

The terminal settings are the same for the USB-B port and the console port:
• 9600 baud rate
• No parity
• 8 data bits
• 1 stop bit
• No flow control
When you connect the USB-B port, it becomes the primary connection and, when the system is
connected, it sends all messages to the USB-B drive.
32
RJ-45 to RJ-45 RJ-45 to DB-9
Rollover Cable Adapter
RJ-45 Pinout DB-9 Pin
8 8
7 6
6 2
5 5
4 5
3 3
2 4
1 7
Terminal Server
Device
Signal
CTS
DSR
RxD
GND
GND
TxD
DTR
RTS
Console Ports