Brocade 5100 Specifications
●
Switch components......................................................................................................... 31
●
●
Facility requirements....................................................................................................... 32
●
●
●
General specifications.....................................................................................................33
●
Data transmission ranges............................................................................................... 35
●
Memory specifications.....................................................................................................35
●
●
●
Regulatory compliance....................................................................................................37
●
Switch components
The Brocade 5100 switch includes the following components:
•
Cabinet-mountable 1U chassis, designed for a 19-inch cabinet space, with forced-air cooling that
flows from the non-port side of the switch to the port side.
•
40 Fibre Channel ports, compatible with short wavelength (SWL), long wavelength (LWL), and
extended long wavelength (ELWL) SFP transceivers
•
One RJ-45 serial port on the port side of the switch
•
One IEEE-compliant RJ-45 connector on the port side of the switch for use with 10/100 Mbps
Ethernet
•
40 port LEDs, 1 switch power LED, 1 switch status LED, 2 Ethernet LEDs, and 2 power supply
LEDs
•
One USB port for system log file downloads or firmware upgrades
•
Two universal AC input and redundant power supplies with AC switches and built-in fans
Weight and physical dimensions
The following table lists the weight and dimensions of the Brocade 5100.
TABLE 3
Dimension
Height
Depth
Brocade 5100 Hardware Reference Manual
53-1000854-06
Physical Specifications
Value
1U = 43 mm (1.7 inches)
610.535 mm (24 inches)
31