Brocade Communications Systems 5100 Hardware Reference Manual page 36

Brocade 5100 Specifications
TABLE 7
Specification
Configurable port types
System architecture
System processor
ANSI Fibre Channel protocol
Modes of operation
Fabric initialization
FC-IP (IP over Fibre Channel)
Aggregate switch I/O bandwidth
Port-to-port latency
The following table lists the EMC (electromagnetic compatibility) for the Brocade 5100.
TABLE 8
Country
United States
Canada
Japan
European Community
Australia/New Zealand
Argentina
Russian Federation
Korea
China (PS only)
Taiwan (PS only)
34
General Specifications
Description
E_Port, F_Port, FL_Port, M_Port, and EX_Port
Nonblocking shared-memory switch
Power PC 440EPX,667 MHz CPU
FC-PH ( Fibre Channel Physical and Signalling Interface standard)
Fibre Channel Class 2 and Class 3
Complies with FC-SW-3 Rev. 6.6
Complies with FC-IP 2.3 of FCA profile
640 Gbps if all 40 ports are running at 8 Gbps, full duplex
700 nanoseconds
EMC specifications
Safety
Bi_Nat UL/CSA 60950-1 1st Ed or latest
Bi_Nat UL/CSA 60950-1 1st Ed or latest
EN60950-1 or latest
IEC60950-1 or latest
IEC60950-1 or latest
GB4943-2001 and GB9254-1998 or latest
CNS 14336(94) or latest
EMC
ANSI C63.4
ICES-003 Class A
CISPR22 and JEIDA (Harmonics)
EN55022 and EN55024
EN55022 or CISPR22 or AS/NZS CISPR22
51318.22-99 and 51318.24.99
KN22 and KN24
GB17625.1-2003 or latest
CNS 13438(95) or latest
Brocade 5100 Hardware Reference Manual
53-1000854-06