How To Use Display Pcb - Turbo Air JUR-36 Service Manual

I.Put the plug in the socket.

7-6 How to use Display PCB

A.Push"SW1" and "SW2" button (SWI . SW2
at the same time and wait five seconds to set
mode.
C.Then push"SW1" button (SWI
unit is at the mode of freezer(F2).
E.Turn off the power after setting the necessity
mode,then restart the power.
J.Turn on the unit.
) B.Bar LED display "F1",the unit is at the mode of freezer.
) one time,the D.Push"SW1" button (SWI
mode of refrigerator(R1).
) agian,the unit is at the