Table of Contents
Advertisement
System Utilities
Format Flash
Press the soft button labeled Format Flash to reinitialize the internal file system. This deletes all
objects and the current OS. (If possible, remember to first save your work in the Storage menu.
Once deleted, the files are completely removed from the PC3K and there is no way to retrieve
them.)This will delete everything that was stored internally on the PC3K, and leave a clean,
empty file system ready for use.
It is possible (though not likely) that the PC3K file system can become corrupted due to
hardware failure or power outage during certain operations. This will result in the Boot Loader
being unable to bring up the PC3K system correctly. In such a circumstance, the Boot Loader
will take over control and present its usual menu. If the file system is completely corrupted, it
will not be possible to reconfigure without first formatting the internal flash memory.
Install Module
This soft button brings up the Update Image page, where you can install individual PC3K
modules. Most of the time you won't need this page, but Kurzweil support may advise you to
install individual modules if you're having problems with your PC3K.
Restore Older
If you have updated the PC3K software but wish to return to the earlier version, press the
Restore Older soft button. You will be brought to the Restore Older page and asked to choose
the image to restore. Note that only one version of the previous image is available to be restored.
If you've restored once, another restore will bring back the most recently updated version.
B--3
Advertisement
Table of Contents
