Unit Installation; Tools Required - ADTRAN NETVANTA 3000 SERIES Hardware Installation Manual

NetVanta 3000 Series Routers
4.

UNIT INSTALLATION

The instructions and guidelines provided in this section cover hardware installation topics such as
wallmounting/rackmounting the unit and installing option cards. These instructions are presented as
follows:
• Mounting Options on page 36
• Supplying Power to the Unit on page 40
• Installing Dial Backup and Network Interface Modules on page 41
For information on router configuration for a specific application, refer to the quick start documents
provided on your ADTRAN OS System Documentation CD. For details on the command line interface,
refer to the Command Reference Guide (also included on your CD).
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic modules can be damaged by static electrical discharge. Before handling
modules, wear an antistatic discharge wrist strap to prevent damage to electrical
components. Place modules in antistatic packing material when transporting or storing.
When working on modules, always place them on an approved antistatic mat that is
electrically grounded.

Tools Required

The customer-provided tools required for the hardware installation of the NetVanta 3000 Series Routers
are:
• Ethernet cable
• Network cable (module-dependent)
• DSX-1 cable (T1/FT1 + DSX-1 module only)
• DBU cable (dial backup functions require an optional DIM)
• Phillips-head screwdriver (rackmounting applications only)
To access the command line interface (CLI) of the NetVanta 3000 Series Routers, you will
also need a VT100 terminal or PC with terminal emulation software and a console port
cable. Instructions on how to access the CLI are given in the Command Reference Guide
(provided on the ADTRAN OS System Documentation CD).
61200860L1-34C © 2003 ADTRAN, Inc.
Hardware Installation Guide
35