Rear Panel Interfaces And Leds - ADTRAN NETVANTA 3000 SERIES Hardware Installation Manual

Hardware Installation Guide

Rear Panel Interfaces and LEDs

10/100BaseT Ethernet Interface and Activity LEDs
The Ethernet port is an RJ-48C connector with LEDs. The yellow activity LED flashes when data
traffic is being sent or received on the Ethernet port. The green link LED is on when the router has a
good connection to the LAN. See Table A on page 47 for the Ethernet port pinout. The Ethernet port
provides the following:
• 10BaseT or 100BaseT with a single connector
• Auto-negotiation
• CSMA/CD
• IEEE 802.3 compatibility
Console Interface
The CONSOLE interface is an EIA-232 serial port (DCE) which provides for local management and
configuration (via a DB-9 female connector). Table B on page 47 shows the
with the exception of the NetVanta 3200 (p/n 61202860L1) which is shown in Table C on page 48.
Connection directly to an external modem requires a cross-over cable.
NET/DBU Card Slot
The
Slot x NET/DBU
in Option Modules on page 21.
Power Supply
Power supplies are shipped with final destinations in mind. For example, the domestic routers are
shipped with a wall mount supply and the international routers are shipped with a universal input
lump-in-line supply with the appropriate cables. All of the 1U products have universal supplies and are
shipped with the appropriate cable. Please refer to Supplying Power to the Unit on page 40 for
connection details.
20
card slot supports various NIM plug-in cards. These card options are described
© 2003 ADTRAN, Inc.
NetVanta 3000 Series Routers
CONSOLE port pinouts,
61200860L1-34C