Table of Contents
Advertisement
English
7 - SETTINGS
This chapter illustrates how to set up or modify the machine
programmable parameters.
The chapter should therefore be read carefully, to fully un-
derstand the correct sequence of operations to be performed.
To access the programming menu, turn off the machine,
hold down the
(Hot Water) and C (Esc) keys, pressing
the main power switch to turn the machine back on.
The main settings options are the following:
•
CREDIT MANAGEMENT
•
AUDIT SINCE RESET
•
AUDIT SINCE INIT
•
SETTINGS
•
CODE
•
TIMER
•
PAYMENT SYSTEM
Structure of programming functions
CODE ?
......
CREDIT MANAGEMENT -
>
10
To exit the settings menu press C (Esc). The machine is in
standard running mode.
Menu selection
Select menus using the various
by pressing the E key. The parameters of each menu can be
modified by pressing
press the E key (e.g., "YES" for "SET DOSE").
If a value has wrongly been modified, the menu can be
exited by pressing the C (Esc)
new value.
Changing numeric values
When you wish to modify a value, press the "E" key. Modify
the 1
number with the keys
st
"E" key again. The cursor will move to the next number.
Use this method for all the numbers present, in the end the
whole value will be saved and you will exit from the
modification.
When entering the programming menu, the set code will be
requested. This will allow you to continue with the
programming. To set it, see "CODE" in the Vending menu.
Note the code when it is changed.
Warning
After 5 attempts to enter an incorrect code, the vending
machine requires the PUC (Personal User Code) to access
the programming menu.
To receive the PUC code, contact the CUSTOMER SERVICE
CENTRE.
If the PUC is correctly entered, you will be requested to set a
new code.
The keys have the following values while setting the code
and the PUC:
Key 1 E (Ent)
Espresso Coffee ............................... 1
Key 2
Coffee ............................................ 2
Key 3
Hot Water ....................................... 3
Key 4 C (Esc)
...................................................... 4
For example, if the code 312241 must be set, the sequence
for entering it is as follows:
1: Key 3
2: Key 1 E (Ent)
3: Key 2
4: Key 2
keys and select options
keys. To save the desired setting
key without saving the
and save by pressing the
Hot Water
Espresso Coffee
Coffee
Coffee
3
1
2
2
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
