Saeco AMBRA SUP 015VR Operating And Maintenance Manual page 20

English
TIMER COIN VALIDATOR
CREDIT PRICES
MANAGEMENT
20
MDB READER ->
ACTIVE
NO
ACTIVE
YES
ACTIVE
NO
MAXIMUM CREDIT
000.00
RECHARGE
NO
RECHARGE
YES
RECHARGE
NO
MAXIMUM RECHARGE
000.00
FREE
VEND
This menu sets all the operation parameters of the MDB
reader.
This menu enables or disables the card acceptance system.
If it is deactivated, it remains permanently locked and will
not accept product payments by card.
This menu sets the maximum credit allowed by the card. If a
card that contains a greater amount is used, it will not be
accepted and the following message appears on the display:
"MDB READER "
"CARD ERROR "
Then "Maximum Credit" = "Maximum Recharge".
If at the time of setting, the chosen "Maximum Credit" value
is less than the "Maximum Recharge" value, the "Maximum
Recharge" will be equal to the "Maximum Credit".
This menu activates or deactivates any recharge operation.
If the function is deactivated, the card may not be recharged.
This menu sets the maximum rechargeable value of the card.
If the credit of the card is less than the "Maximum Recharge",
the card may be recharged. Otherwise, recharging will be
disabled.
E.g.: Card Credit
Maximum Recharge
Credit inserted in the coiner
Amount reported on the card
The remaining 10 EUR shall remain in the machine as credit
in the coiner and at the end of the overpay time it will be lost.
If at the time of setting, the chosen "Maximum Recharge"
value is greater than the "Maximum Credit" value, the setting
will not be accepted.
The card reader has a recharge limit as well. If this limit is
less than the one defined for "Maximum Recharge", the latter
shall be equal to the one defined in the card reader.
= 40 EUR
= 50 EUR
= 20 EUR
= 10 EUR