Table of Contents
Advertisement
English
3 - HANDLING AND
STORAGE
Handling
During handling and transport, the machine must be kept in
the upright position according to the instructions on the
packaging.
Lift and position with care.
Do not shake the machine.
Storage
The machine must be stored according to the following
temperatures:
--
minimum temperature:
-
maximum temperature: 40°C
-
maximum humidity:
The machine packaging consists of cardboard and expanded
polystyrene.
Warning
Given the overall packaging weight, do not pile up more
than three machines.
The machine must be stored in its original packaging away
from humidity and dust.
4 - SAFETY
In compliance with the Low Tension Directive 2006/95/EC
(which replaces the directive 73/23/EEC and following
amendments) and CE Marking Directive 93/68/EEC,
SAECO Vending has drawn up a technical file of the
AMBRA vending machine held at its plants. The following
regulations were taken into account during the design phase:
-
EN 55014
-
EN 61000-3-3
-
EN 61000-4-3
-
EN 61000-4-5
-
EN 60335-2-75
4.1
General safety norms
Danger
It is extremely dangerous to put electrical parts in contact
with water! Do not direct the hot water jet toward body
parts; handle the hot water pipe with care: danger of burns!
Use the machine for its intended use only.
Do not apply technical modifications to the machine: it can
be extremely dangerous!
6
4°C.
95%
-
EN 6100-3-2
-
EN 61000-4-2
-
EN 61000-4-4
-
EN 61000-4-11
-
EN 60335-1
Warning
The machine must be used only by adults and by those familiar
with it.
Do not allow children to play with the machine. Children
are not aware of the danger of electrical devices.
Power supply
Do not touch electrical parts to avoid serious injuries. Plug
the machine in the correct socket. Voltage must correspond
to that indicated on the plate inside the machine (Fig. 2).
Power cord
If damaged, the power cord must be replaced by an Ap-
proved Assistance Centre. Do not connect the cord near
corners and sharp or very hot objects. Avoid contact with
oil. Do not stretch the cord when moving the machine. Do
not unplug the machine by pulling the cord or touch it with
wet hands. The cord must not hang from tables and shelves.
Location
Place the machine on a stable surface that cannot be knocked
down. Water could pour out: danger of burns! Do not use
the appliance outdoors or in low temperature environments.
Do not place the machine on a very hot surface or near
open flames to avoid damage to the machine casing.
Danger of burns
Keep hands away from the hot water and coffee jet.
Positioning
For the correct functioning of the machine follow the indica-
tions below:
-
select an even surface
-
select a location that is sufficiently well-lit, clean and
near an easily reachable power source.
-
the minimum distance between the wall and the machine
must be in line with the indications outlined in figure 3.
100 mm.
Fig. 3
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
