Adjusting Machine Settings - Saeco SM6682/10 Manual

With the CoffeeEqualizer Touch function you can adjust the following settings:
1 Aroma strength
2 Coffee quantity
3 Milk quantity
4 Water quantity
Note: It depends on the drink you choose which settings you can adjust.
Save your favorite drinks in a profile
The machine allows you to adjust the settings of a drink to your own preference and to store the adjusted
drink in a personal profile. You can select a profile and store a recipe using the profiles.
You can create a profile and add a drink using the profile
1 Tap the profile icon on the main menu (Fig. 6).
2 Tap the Plus icon (Fig. 7).
3 Type your name and select your favorite icon.
4 You are ready to add a drink. Tap the drink icon of your choice.
5 Personalize the drink via the CoffeeEqualizer Touch or the CoffeeMaestro function.
6 Tap on the 'Safe to profile' icon to store it in your personal profile (Fig. 8).
Extra shot (ExtraShot)
Your machine offers you the possibility to add an extra shot of Ristretto to your coffee and milk drinks, for
example if you want to have a stronger coffee.
1 Place a cup under the spout.
2 Tap one of the one-touch drinks icons to select a drink (Fig. 4).
3 Slide the adjustable bar up to set the strength to the top level and select the ExtraShot function (Fig. 9).
4 Then press the start/stop
5 To stop dispensing the drink before the machine has finished, press the start/stop
When you have selected the ExtraShot function, you can only brew one coffee at the time.
The extra shot function is not available for all drinks.

Adjusting machine settings

You can adjust most machine settings by tapping the Settings
For online support (frequently asked questions, movies etc.), scan the QR code on the cover of this booklet
or visit www.saeco.com/care
Setting the water hardness
We advise you to adjust the water hardness setting to the water hardness level in your region for optimal
performance and a longer lifetime of the machine. This also prevents you from having to descale the
machine too often. The default water hardness setting is 4: hard water.
Use the water hardness test strip supplied in the box to determine the water hardness
in your region:
1 Immerse the water hardness test strip in tap water or hold it under the tap for 1 second (Fig. 10).
2 Wait 1 minute. The number of squares on the test strip that turn red indicate the water hardness (Fig.
11).
Set the machine to the correct water hardness:
1 Tap the Settings
icon to start brewing the drink.
icon and scroll from left to right to select 'Water hardness'.
5 Drink temperature
6 Foam amount
7 You can also decide to prepare 1 or 2 cups
8 The order of first dispensing coffee or milk
icon.
icon and follow the steps on the screen.
11
English
icon again.