Page 3
“4-to-1” allows one keyboard and mouse to control 4 different PC’s eliminating the need for a separate mouse and keyboard for each PC. “4-to-1” Upon power up the will locate and identify the type of mouse and keyboard connected to it, and also emulate and present a fully functioning keyboard and mouse to each connected PC The unit draws power from the connected PC’s and no power supply is needed (though there is a connector for external power).
Page 4
• Returns to last selected PC after power off or reset • Designed and manufactured in the USA 1. Use special “Y” input cables (ordered separately) to connect the PCs to the Switch. The black end connects to the Switch. The purple connector, of the “Y”...
Page 5
The second way to switch is through a hot-key combination from the keyboard. The hot-key combination is as follows. Press and release: “Scroll Lock” Press and release: “Scroll Lock” Press and release: “1” or “2” or “3” or “4” “4-to-1” will now switch to the PC connected to the port corresponding to the number pressed.
Page 6
Symptom Possible Cause(s) Keyboard locks up Check PS2 cable and connection Keyboard is unplugged Keyboard needs to be unplugged and re-plugged in Press Reset button on the rear of 4-to-1 Mouse locks up Check PS2 cable and connection Mouse is unplugged Mouse needs to be unplugged and re-plugged in Press Reset button on the rear of 4-to-1 Power LED(s) not on...
Need help?
Do you have a question about the 4-to-1 KM and is the answer not in the manual?
Questions and answers