Installation procedure
Follow the procedure shown below to install the USB-COM device driver that comes with the scanner in a CD-ROM.
• The CD-ROM includes drivers for Windows 98SE/Me and those for Windows 2000/XP, and an exclusive
uninstaller which can be commonly used with all Windows versions.
• To uninstall these drivers, use the exclusive uninstaller.
• For Windows 2000/XP, administrative permission (Administrator Login) is necessary to install/uninstall drivers.
Windows 98SE
(1) Switch your computer on to run Windows 98SE.
(2) Double-click the driver icon to extract it.
(3) Connect the scanner's USB interface cable to the computer
or USB hub, and the "New Hardware Found" appears.
(4) The Add New Hardware Wizard starts.
Click Next to proceed.
(5) Select Search for the best driver for your device.
(Recommended), then click Next.
(6)
Select the Specify a location check box, specify the folder
("WIN9X") where extracted drivers for Windows 98SE/Me
are located (or click Browse to specify it), and then click
Next.
NOTE: Do not specify any folder other than "WIN9X."
Doing so may affect the system badly.
NOTE: This sample assumes that the drivers have been
extracted in D: DRIVER. You need to specify the folder
where you have actually extracted the drivers.
7