Wakeup Feature - Yaesu VX-3E Operating Manual

Vhf/uhf ultra-compact dual-band transceiver with wide band coverage
Hide thumbs Also See for VX-3E:
Table of Contents

Advertisement

M
ISCELLANEOUS
The Wakeup feature is similar to the Receive Battery Saver. However, it is a newer, more
advanced feature which conserves battery life by providing a longer "sleep" time than the
regular Receive battery Saver. The Wakeup feature, once engaged, operates while the trans-
ceiver is turned off ("WAKEUP" will appear on the LCD).
To set up the Wakeup feature:
1. Press and hold in the [ TXPO ] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 93: WAKEUP.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ TXPO ] key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to select the desired "sleep" duration.
5 - 60SEC: (5 second/steps) Based on the selected time value,
the radio will periodically check the operating frequency which it was on
when the radio was turned off for activity. (That was in use when the
radio was turned off.) If a signal is received on the frequency strong enough
to open the Squelch, the radio will turn itself on fully. If the EAI feature
was activated when the radio was turned off, the radio also checks on the
EAI frequency (Memory Channel "EAI") for activity.
Checks the EAI frequency (Memory Channel "EAI") every 5 seconds. If a
EAI:
properly-coded signal is received on the EAI frequency, the radio will
turn itself on and then automatically transmit in accordance with the set-
ting of Set Mode Item 30: EAI.
Disables the Wakeup feature.
OFF:
5. When you have made your selection, press the PTT switch to save the new setting and
exit to normal operation.
If you wish to disable the Wakeup feature, just repeat the above procedure, rotating the
DIAL knob to select "OFF" in step 4 above.
When the radio is turned off, the Wakeup feature will be engaged,
and the "WAKEUP" notation will be seen on the display.
You may cancel the Wakeup feature (complete power off) tempo-
rarily by pressing the POWER switch while the Wakeup feature is
engaged.
94
S
ETTING
W
F
AKEUP
EATURE
VX-3R/E O
PERATING
M
ANUAL

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vx-3r/e

Table of Contents