Manual Repeater Shift Activation; Changing The Default Repeater Shifts - Yaesu VX-3E Operating Manual

Vhf/uhf ultra-compact dual-band transceiver with wide band coverage
Hide thumbs Also See for VX-3E:
Table of Contents

Advertisement

M
If the ARS feature has been disabled, or if you need to set a repeater shift direction other
than that established by the ARS, you may set the direction of the repeater shift manually.
To do this:
1. Press and hold in the [ TXPO ] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 68: RPT.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ TXPO ] key momentarily to enable adjustment of this
Item.
4. Rotate the DIAL knob to select the desired shift among "–RPT,"
"+RPT," and "SIMP."
5. When you have made your selection, press the PTT switch to save the new setting and
return to normal operation.
If you make a change in the shift direction, but still have Automatic Repeater
Shift engaged (see previous section), when you change frequency (by rotat-
ing the DIAL knob, for example) the ARS will over-ride your manual setting
of the shift direction. Turn ARS off if you do not wish this to happen.
C
D
HANGING THE
If you travel to a different region, you may need to change the default repeater shift so as to
ensure compatibility with local operating requirements.
To do this, follow the procedure below:
1. Set the VX-3R/E's frequency to the band on which you wish to change the default
repeater shift (144 MHz or 430 MHz Ham Band).
2. Press and hold in the [ TXPO ] key for one second to enter the Set mode.
3. Rotate the DIAL knob to select Set Mode Item 69: RPT.SFT.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
4. Press the [ TXPO ] key momentarily to enable adjustment of this
Item.
5. Rotate the DIAL knob to select the new repeater shift magnitude.
6. When you have made your selection, press the PTT switch to
save the new setting and return to normal operation.
If you just have one "odd" split that you need to program, don't change the
"default" repeated shifts using this Set Mode Item! Enter the transmit and
receive frequencies separately, as shown on page 43.
VX-3R/E O
PERATING
R
ANUAL
EPEATER
R
EFAULT
EPEATER
M
ANUAL
R
EPEATER
S
A
HIFT
CTIVATION
S
HIFTS
O
PERATION
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vx-3r/e

Table of Contents