Yaesu VX-3E Operating Manual page 120

S M M
ET ENU ODE
Set Mode Item 62 [ PAG.CDT ]
Function: Sets the Transmitting Pager Code for the Enhanced CTCSS Paging & Code
Squelch.
See page 34 for details.
Set Mode Item 63 [ PR FRQ ]
Function: Program the CTCSS Tone frequency for the User programmed Reverse CTCSS
Decoder.
Available Values: 300Hz - 3000Hz (1000 Hz/step)
Default: 1600 Hz
Note: This Set Mode Item can select and set the function to each memory channel indi-
vidually.
Set Mode Item 64 [ PRI.RVT ]
Function: Enables/Disables the Priority Revert feature.
Available Values: ON/OFF
Default: OFF
See page 63 for details.
Set Mode Item 65 [ PRI.TMR ]
Function: Selects the time between the Priority (Dual Watch) channel checks, when the
feature is active.
Available Values: 0.1 - 0.9S (0.1S/step) or 1.0S - 10.0S (0.5S/step)
Default: 5.0S
See page 62 for details.
Set Mode Item 66 [ PSWD ]
Function: Programs and activates the Password feature.
See page 91 for details.
Set Mode Item 67 [ PTT.DLY ]
Function: Selects the time delay before the carrier is transmitted, when the PTT switch is
pressed.
Available Values: OFF/20MS/50MS/100MS/200MS
Default: OFF
Set Mode Item 68 [ RPT ]
Function: Sets the Repeater Shift Direction.
Available Values: SIMP/-RPT/+RPT
Default: Depends on the transceiver version, as well as the setting of Set Mode Item 5
ARS.
Note: This Set Mode Item can select and set the function to each memory channel indi-
vidually.
118 VX-3R/E O M
PERATING ANUAL