Manual Repeater Shift Activation; Changing The Default Repeater Shift - Yaesu FT-8800R Operating Manual

R
EPEATER
M
If the ARS feature has been disabled, or if you need to set a repeater shift direction other
than that established by the ARS, you may set the direction of the repeater shift manually.
To do this:
1. Press the [ SET ] key momentarily to enter the Set mode.
2. Rotate the "Main" band DIAL knob to select Menu #33 (RPT.MOD
3. Press the "Main" band DIAL knob momentarily, then rotate the "Main" band DIAL
knob to select the desired shift among "–," "+," and "OFF
4. Press and hold in the "Main" band DIAL knob for 1/2 second to save the new setting
and exit to normal operation.
Changing the Default Repeater Shifts
If you travel to a different region, you may need to change the default repeater shift so as to
ensure compatibility with local operating requirements.
To do this, follow the procedure below:
1. Press the [ SET ] key momentarily to enter the Set mode.
2. Rotate the "Main" band DIAL knob to select Menu #36 (SHIFT
3. Press the "Main" band DIAL knob momentarily, then rotate the "Main" band DIAL
knob to select the new repeater shift magnitude.
4. Press and hold in the "Main" band DIAL knob for 1/2 second to save the new setting
and exit to normal operation.
If you just have one "odd" split that you need to program, don't change the "de-
fault" repeated shifts using this Menu Item! Enter the transmit and receive fre-
quencies separately, as shown on page 33.
28
O
PERATION
R
ANUAL EPEATER
S A
HIFT CTIVATION
RPT.MOD RPT.MOD
RPT.MOD). RPT.MOD
OFF OFF." OFF
OFF
SHIFT SHIFT
SHIFT SHIFT).
FT-8800R Operating Manual