Technical Specifications; Functional Specifications - Centurion G-SPEAK Installation Manual

Technical Specifications

Physical
Input voltage
Current draw
Call buttons on Calling Module
Call confirmation at Calling Module
Speech volume
Wiring requirements (between
Calling Module and GSM
Controller)
Channels
Input activation
Input filter
Input blanking
Output pulse time range
Network compatibility
SIM card required
Airtime required
Operating temperature
Calling Module illumination
Housing material
IP rating of Calling Module and
GSM Controller
Surge protection

Functional Specifications

Function
Ability to switch/monitor
devices and functions
Number of users
Special functionality
Systems Status query
Systems Settings query
Notification
G-SPEAK CLASSIC
Quiescent 30mA maximum 300mA
Adjustable at Calling Module using Call Buttons
6 wires, min 0.2mm²; Maximum 10m between
Calling Module and GSM Controller
One - output only
Not applicable
Not applicable
Not applicable
1 millisecond - 24hrs (adjustable in milliseconds)
Call Buttons and labels with backlit white LEDs
G-SPEAK Classic
One output to activate device
Up to two Voice Phones
(one per Call Button), plus
Up to ten Switch Phones
Yes, via SMS (SMS from Voice Phone)
Yes, via SMS (SMS from Voice Phone)
Battery-low/volume changed/
password reset/firmware upgrade
page 7
G-SPEAK CLASSIC+
10V - 30V DC
Two
Yes
Four - individually configurable
as either Input or Output
Rising edge/falling edge
/both
0.1s - 24 hours
(in milliseconds)
0.1s - 24 hours
(in milliseconds)
Yes
Yes
Yes
-20°C to +50°C
ABS
Ip55
Yes
G-SPEAK Classic+
Four inputs/outputs to activate
or monitor devices /functions
(individually configurable)
Up to four Voice Phones
(two per Call Button)
Up to 100 Switch Phones
Talk Mode (Activate via SMS
from Voice Phone)
Listen Mode (Activate via SMS
from Voice Phone)
SMS activation of outputs