Special Commands - Centurion G-SPEAK Installation Manual

P.xxxx.CO.RESET.ALL
P.xxxx.CO.RESET.USR
P.xxxx.CO.RESET.CON
P.xxxx.co.OU3N."GATE TRIGGER"
Commands can be concatenated, i.e. multiple commands sent in a single SMS,
by simply separating the commands with a space.
Command
P.xxxx.CO.OU1LA DB.BU2.1
P.xxxx.CO.NP.4545 AT.L.
*100*01*5686299345#

Special Commands

Any of the Voice Numbers can text the G-SPEAK with four special messages (depending
on the G-SPEAK model) to activate the following functions:
Command
By SMSing 'LISTEN' to the G-SPEAK, the G-SPEAK will mute the
speaker on the Calling Module, and call the phone that sent the SMS,
allowing the Called Party to listen in on what is happening at the Calling
Module. Anyone at the Calling Module will be unaware that a call is in
LISTEN
progress and that they are being listened to. DTMF functionality is
available during this call, allowing the Called Party to activate any of
the outputs by pressing 1, 2, 3 or 4 on their phone keypad. In addition,
pressing* or # will reset the call duration timer, extending the call by
the call
By SMSing 'TALK' to the G-SPEAK, the G-SPEAK will call the phone
that sent the command, allowing the Called Party to talk to anyone at
the Calling Module. DTMF functionality is available during this call,
allowing the Called Party to activate any of the outputs by pressing
TALK
1,2,3 or 4 on their phone keypad. In addition, pressing* or # will reset
the call duration timer, extending the call by the call duration time.
By SMSing 'STATUS' to the G-SPEAK, the G-SPEAK will send an SMS
to the phone that sent the STATUS command, indicating firmware
STATUS
version, serial number, signal strength, input and output states, etc.
Deletes all Voice Phone and Switch Phone
numbers, and resets configuration settings to
Factory Defaults
Deletes all users (Voice Phone and Switch
Phone numbers), and leaves all configuration
settings as is
Resets all configuration settings to factory
defaults, and leaves all users (Voice Phone
and Switch Phone numbers) as is
Changes the name of Output 3 to GATE
TRIGGER
Description
Configures Output 1 as a latching output AND
deletes Voice Phone number 1 from Button 2
Changes the system password to 4545 AND
loads airtime voucher number 5686299345
onto a Vodacom SIM card
Description
duration time.
page 33