Inserting An Activated Sim Card - Centurion G-SPEAK Installation Manual

6. Use a 6mm drill bit to open the required
cable entry hole.
Ensure sufficient cable is provided
for to reach the terminals of both
the I/O terminals and the voice
communication terminals
7. Fix the cable to the wall using cable
saddles.
8. Seal all the holes with silicone sealant.
9. Re-insert the circuit board and ensure
that the retaining clips are holding it in
place
Inserting an Activated
SIM Card
Ensure that the activated SIM card
going into the Module for the first
time is not PIN protected
1. Slide the SIM card housing's locking
mechanism up to release the housing.
Do not use a screwdriver to
open the SIM Card locking
mechanism.
6mm drill bit
Cover
Cable
saddles
Power
cable
page 16
Cable
entry
hole
FIGURE 21.
Voice
Circuit
communication board
cable
FIGURE 22.
FIGURE 23.