Safety; Standard Safety Instructions - Shop fox M1015 Instruction Manual

READ.MANUAL.BEFORE.OPERATING.MACHINE.
FAILURE.TO.FOLLOW.INSTRUCTIONS.BELOW.WILL.
NOTICE
Standard.Safety.Instructions
1.. Thoroughly.read.the.Instruction.Manual.before.operating.your.machine..Learn the applications,
limitations and potential hazards of this machine. Keep the manual in a safe and convenient place
for future reference.
2. Keep.work.area.clean.and.well.lighted..Clutter and inadequate lighting invite potential hazards.
3. Ground.all.tools..If a machine is equipped with a three-prong plug, it must be plugged into a three-
hole grounded electrical receptacle or grounded extension cord. If using an adapter to aid in accom-
modating a two-hole receptacle, ground using a screw to a known ground.
4. Wear.eye.protection.at.all.times..Use safety glasses with side shields or safety goggles that meet
the appropriate standards of the American National Standards Institute (ANSI).
5. Avoid.dangerous.environments..Do not operate this machine in wet or open flame environments.
Airborne dust particles could cause an explosion and severe fire hazard.
6. Ensure.all.guards.are.securely.in.place.and in working condition.
7. Make.sure.switch.is.in.the.OFF.position.before connecting power to machine.
8. Keep.work.area.clean,.free of clutter, grease, etc.
9. Keep.children.and.visitors.away..Visitors must be kept at a safe distance while operating unit.
10. Childproof.your.workshop.with padlocks, master switches or by removing starter keys.
11. Stop.and.disconnect.the.machine.when.cleaning,.adjusting.or.servicing.

SAFETY

RESULT.IN.PERSONAL.INJURY.
Indicates an imminently hazardous situation which, if not avoided, WILL
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, COULD
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, MAY
result in minor or moderate injury.
This symbol is used to alert the user to useful information about proper
operation of the equipment, and/or a situation that may cause damage
to the machinery.
-4-
M1015 6" x 10" Mini-Lathe