Identifying Temperature Controller Keys; Setting The Process Air Temperature - AEC ACM Series Operation And Installation Manual

5-4 Identifying Temperature Controller Keys

Mode Key
Down Key
Up Key
5-5

Setting the Process Air Temperature

ACM Series Dehumidifying Dryers
Press the Mode key to shift the display to the next set of
parameters. The menu screen displays.
Press the Down arrow key to lower the process air set point
temperature. During setup, it lets you decrease the value of the
parameter displayed on the set point LED readout.
Press the Up arrow key to raise the process air set point
temperature. During setup, it lets you increase the value of the
parameter displayed on the set point LED readout.
When setting the process air temperature, consult with the resin
manufacture for the recommended drying temperature.
To change the process air temperature set point with the dryer
running:
Press to raise the set point to the temperature you want.
Press to lower the set point to the temperature you want.
Page 35