AEC ACM Series Operation And Installation Manual page 41

WATLOW Operating Parameters
Entering Operating Parameters to Select Modes
ACM Series Dehumidifying Dryers
The WATLOW controller has only one mode selection; ALARM.
The factory at AEC sets the security level to protect the critical
parameters from being accidentally changed. Below is an
explanation of the modes you will have access to and the AEC
default settings.
To enter the display:
1. Press both the Up
seconds from the home page. The word SEE will appear in
the upper display and PAGE will appear in the lower
display.
2. Press the Advance Key
prompts.
3. Press the Up
parameter value.
4. Press the RESET Key at any time to return to the Home
Page display.
and Down keys for three
to move through the parameter
or Down keys to change the
Page 41