AEC ACM Series Operation And Installation Manual page 5

Safety Considerations
ACM Series Dehumidifying Dryers
AEC ACM Series membrane dryers are designed to provide safe
and reliable operation when installed and operated within design
specifications, following national and local safety codes.
To avoid possible personnel injury or equipment damage when
installing, operating, or maintaining this equipment, use good
judgment and follow these safe practices:
Follow all SAFETY CODES.
Wear SAFETY GLASSES and WORK GLOVES.
Disconnect and/or lock out power before servicing or
maintaining the dryer.
Use care when LOADING, UNLOADING, RIGGING, or
MOVING this equipment.
Operate this equipment within design specifications.
OPEN, TAG, and LOCK ALL DISCONNECTS before
working on this equipment. It is a good idea to remove the
fuses and carry them with you
Make sure the dryer and components are properly
GROUNDED before switching on power.
Do not jump or bypass any electrical safety control.
Do not restore power until all tools, test equipment, etc. have
been removed and the dryer and allied equipment are fully
reassembled.
Only PROPERLY TRAINED personnel familiar with the
information within this manual should work on this equipment.
Page 5