Alarm Display Messages - AEC ACM Series Operation And Installation Manual

6-3

Alarm Display Messages

Note: The relay screen which contains the Alarm Display Messages is located inside
the controller enclosure.
WARNING!
Temperature Controller Alarm and/or
Regen Heater Temp Switch and/or
Process Heater Temp Switch and/or
Redundant Temp Safety
Insufficient Air Pressure to Run Unit Alarm
Multiple Alarms
No Alarms
Page 46
Do not attempt to check the Alarms on the Controller
located within the unit enclosure unless you are a qualified
The following is a list of Alarm Display Messages which can be
found on the relay screen:
electrician!
HIGH TEMP
FAULT
AIR PRES SW
HIGH TEMP
FAULT
SYSTEM
NORMAL
ACM Series Dehumidifying Dryers