Power One Aurora Installation Manual page 7
Hide thumbs
Also See for Aurora:
- Installation and operator's manual (65 pages) ,
- Installation and operation manual (104 pages)
Advertisement
5.
Terminate the last inverter. Make sure the last inverter is terminated as per the
Aurora inverterdocumentation. The DIP switch on the last inverter's RS-485 terminal
block must be set to ON. See the figure in step 4 above for an example of the DIP
switch that needs to set to ON for the last inverter. For detailed information, refer to
the section on communications in the inverter installation manual.
7
Advertisement
Need help?
Do you have a question about the Aurora and is the answer not in the manual?