Default; General Settings; Set Camera Mode; Format Sd-Card - Suntek HT-002LI User Manual

other directory in the computer, you need to move the Parameter.dat file to the root directory of the SD card before inserting the card in the
camera.
If you like, you can use the manufacturer default settings by clicking on Default.
Retrieve the SD card from the computer and insert it in the camera. Switch to the TEST position to enter the TEST mode. You could check
the finished setting.

4.1.5 Default

Default Settings are listed as below:

4.1.6 General Settings

The operating steps are suitable for following menu items: Camera Mode, Photo Size, Video Size, Multi, Video Length, Delay, Timer and
GSM Mode.

4.1.7 Set Camera mode

There are three camera modes: Camera, Video and Camera+Video. The way to set the camera mode is via setting menu.
The following shows how to set camera mode to Video, provided that the previous option is Photo:
a) Press MENU to display the setting menu.
b) Press DOWN to select Mode.
c) Press RIGHT to select Video.
d) Press down the select switch to save the current setting.
Press MENU to cancel setting and return to info display.

4.1.8 format SD-Card

The system will delete all images or videos stored in the SD-card after formatting, make sure that you have made a backup of important
data.
a)Press MENU to display the setting menu.
b)Press RIGHT to select System setting.
c)Press DOWN to select Format.
d)Press RIGHT to select SD Card.
e)Press down the select switch to choose Enter to enter into submenu.
f)Press down to select OK. OK will be highlighted.
g)Press OK to start formatting the SD-card. During formatting, the display screen will show a message "Please Wait" as below.
Press MENU to cancel setting and return to info display.

4.1.9 Set Photo Size

This parameter has three values :12MP 8MP and 5MP. The default value is 5 mega pixels. The following shows how to set pixel size as 5M
Pixel:
a) Press MENU to display the setting menu.
b) Press DOWN to select Resolution
c) Press Right to select 12M Pixel
d) Press down the select switch to save the current setting, then press menu to return to info display.
Press MENU to cancel setting and return to info display.

4.1.10 Set Video Size

This parameter also has four values: 1080P,WVGA,QVGA.
Page8