Table of Contents
Advertisement
Image Acquisition with the AxioCam MRc5
Deactivating the focus bar.
Deactivating the live image scaling (1:1 representation of the image).
Activating a frame for the live image (Size) on the Frame property page.
Set image orientation to original on the General property page (no
rotation).
NOTE:
Note that the above mentioned notes are only valid for short exposure
times, as for very long exposure times the speed of the acquisition is
mainly dominated by the exposure time.
For very long exposure times, the live image will appear grainy, as
automatic amplification is active. However, this will not influence the
quality of the final image.
Notes on optimum color reproduction in
AxioVision
Below you will find a detailed description of how best to set up AxioVision to
achieve optimum color reproduction with the AxioCam MRc5.
NOTE:
For an optimum color reproduction the monitor first has to be adjusted.
To do so please use a well-suited image.
Adjusting the display characteristic curve in AxioVision
In order to achieve optimum reproduction of the AxioCam MRc5 data on a
monitor, the display characteristic curve must be used to set "gamma
compensation". The advantage here is that only the display is influenced and
the actual data remain unchanged. Further details on this can be found
below. The settings can be done as follows:
With the mouse click on the icon
58
in the footer of the live image.
B 48-0028 e 10.2003
Hide quick links:
Advertisement
Table of Contents
