Quick Guide To The First Image With Axiovision - Zeiss AxioCam MRc5 Installation Reference Manual

2.2 Quick Guide to the First Image with
AxioVision and AxioCam MRc5
If you are using several cameras on your system you must always make the
AxioCam MRc5 camera the active camera before proceeding.
Start AxioVision by double-clicking on the corresponding symbol.
Select from the Acquisition menu the Select AxioCam MRc5 function.
The image acquisition can also be easily done via the toolbar. Open the
corresponding menu by clicking on
The text below describes how to achieve your first image in AxioVision with
just a few clicks of the mouse.
The Standard workflow is the easiest way to control image acquisition. If the
workflows are not displayed, in the View menu select the Windows
function, and there select the Workflow command.
NOTE:
The workbar may in fact be open but covered by the work area. If that is
the case, simply click on the Workflow tab at the bottom edge of the
work area
AxioCam MRc5 Installation + Reference
Image Acquisition with the AxioCam MRc5
.
.
35