Frame - Zeiss AxioCam MRc5 Installation Reference Manual

Image Acquisition with the AxioCam MRc5

Frame

In this field you can specify whether the frame or the entire area of the sensor
is used for the acquisition.
Refresh overview: This button makes it possible to insert an overview image
into the area where the frame can be positioned. This makes it extremely easy
to target your specific area of interest.
In the displayed overview image a frame can be positioned by using the
mouse, which corresponds to the selected frame of the acquired image. The
shape and size of the frame can be changed by clicking on and dragging the
edges of the frame while holding down the left-hand mouse button. It is also
possible to move the frame by clicking inside it and keeping the button
depressed as you change its position.
Center: By clicking on Center you can automatically center the selected
frame. This can be useful as interesting parts of the sample are usually moved
to the center of the view area. In addition the center of the view area is the
place of the highest optical quality.
Framestart / Framesize: The start point and the selected frame size will be
displayed in these input fields. Alternatively you can enter the values manually.
It is also possible to select default frame sizes from the drop-down list box and
position it in the center of the image by using the Center button.
Memory used: Memory used shows the memory size of the acquired image,
which depends on the camera resolution, the image size of the selected
image frame and of the selected gray value scaling.
52 B 48-0028 e 10.2003