General Notes - Zeiss AxioCam MRc5 Installation Reference Manual

General notes

Please ensure the notes described below are adhered to when setting up and
operating the AxioCam MRc5 camera.
All connectors must be firmly and securely attached.
Please protect the data cable from excessive heat (e.g. halogen lamps,
microscope fluorescence illumination).
Only use the camera in a clean and dry location.
The camera must be protected against mechanical impact. External
damage may affect the operation of inner components.
Keep chemicals and fluids away from the camera. To avoid the risk of fire,
do not use near inflammable liquids or gases.
Make sure there is sufficient ventilation of the camera head. Avoid direct
exposure to sunlight and locations near to heat sources (radiators, stoves).
Overheating can cause noisy images.
The camera housing can be cleaned using normal microscope cleaning
material.
If a repair is necessary send the camera including all cables with a detailed
description of the fault to:
Carl Zeiss
Service Mikroskopie
Abt. MS-LO2
Königsallee 9-21
D-37081 Göttingen
AxioCam MRc5 Installation + Reference
Installation of the AxioCam MRc5
Tel.: (++49) 551 5060 428
Fax: (++49) 551 5060 325
eMail: mikro.reparaturen@zeiss.de
3