Table of Contents
Advertisement
Installation of the AxioCam MRc5
1.4 Installing the Driver Software
In order to operate the AxioCam MRc5 the AxioVision software is needed.
First connect the AxioCam MRc5 to your PC (see the section "Setting
up the camera system"), and then install the driver software.
General
Firstly we would like to emphasize a number of important points:
Allow sufficient time for installation. As a rule this will take just over five
minutes, although in exceptional circumstances considerably more time
may be necessary. The actual time you need will depend on the current
status of your computer's Windows operating system.
Carl Zeiss's image processing products have been developed using the
most up-to-date software tools and methods. This means that you must
first update your computer's operating system to this same standard to
ensure that things will run smoothly. The files to be installed are
contained in the enclosed installation program and are standard Microsoft
products or updates.
For some of the Microsoft update components the installation instructions
are often only available in English. If you are installing a Carl Zeiss product
in English then this presents no problems. If, however, you are installing a
Carl Zeiss product in German or another language, then the language will
change during installation if, for example, a Microsoft update component
is installed.
During installation you will have to answer a sequence of questions. We
have kept such questions to a minimum. Take sufficient time to read
through the questions carefully and only then decide which answer
applies.
20
B 48-0028 e 10.2003
Hide quick links:
Advertisement
Table of Contents
