Table of Contents
Advertisement
MCS 352 Features and Functions
Descriptions of the gauges, control switches, and status indicators making up the control panel are
listed below. Please become familiar with these features and functions before using the unit
Adjust Time Knob
Service Selector
Switch
Start/Run Switch
(Momentary)
Run Cycle Light
(green)
On / Off Switch
On / Off Light (orange)
Fuel Pressure Gauge
Pressure Adjust
Regulator
Warning Alarm
Output Hose (red)
Return Hose (black)
Fuel Filter
Battery Cables
Circuit Breaker
Fuel Tanks (2)
Sets or re-sets the system run time in one-minute increments, from 1
to 60 minutes.
Selects fuel type: Diesel or Gasoline
Starts the cleaning cycle.
Illuminates when the run cycle is under way.
Shuts off power to the unit.
Illuminates when switch is on.
Displays output pressure of the unit's output hose.
Used to adjust the gasoline (petrol) system pressure during the
cleaning process. Turn clockwise to close (increase the pressure).
Counterclockwise to open (decrease the pressure).
Sounds until pump builds pressure, or when the run cycle is
complete or when a pressure loss occurs.
Connects to the input side of the vehicle's engine fuel system.
Connects to the return side of the vehicle's engine fuel system.
Filters out contaminants that become removed during the cleaning
Appendix
process. See
Positive (red) and negative (black) battery connections
(12 VOLTS DC)
15 Ampere circuit breaker for pump
Holds up to 2 liters (70oz.) per tank
for replacement information
.
Advertisement
Table of Contents
