Table of Contents
Advertisement
Flammable Liquid can squirt out of pressurized lines when connecting or
disconnecting.
Wear Safety goggles.
Obtain ZERO pressure before connecting or disconnecting any fuel lines or
adaptors.
Wear chemical resistant gloves when connecting or disconnecting fittings and
adaptors.
Wrap shop towel around pressure fittings and adaptors when disconnecting.
Avoid exposure to flames, sparks, hot engine parts, and other ignition sources.
Explosion or flame or exposure to flammable liquid and vapors can cause injury.
As shown in the figure below, connect the
8.
carburetor and block / deadhead the fuel line coming from the vehicle's fuel pump.
You are now ready to perform the carburetor cleaning procedure.
SEE NEXT PAGE
/!\ WARNING
MCS 352
output
hose to the inlet of the
(red)
Advertisement
Table of Contents
