Table of Contents
Advertisement
Purging Air from the System (Priming)
It will be necessary to purge the air from the unit's plumbing prior to connecting to the engine's fuel
system.
.
Connect the
1
OUTPUT (RED)
adapters 060-1400 and 060-1100, as shown in
clamp.
.
Press
2
SERVICE SELECTOR
past 5 minutes. Press
Operate the system in
switch. The unit's filter and hoses should now be purged of air that could possibly go
in the engine's fuel system, if this procedure was not performed. Press off the
switch.
/OFF
Disconnect the adaptors.
3.
Figure B
hose and the
RETURN (BLACK)
switch to
DIESEL FUEL SYSTEM SERVICE.
switch to on. Press and hold the
ON/OFF
mode for one minute, and then release the
PRIME
hose together using
below. Secure with hose
FIGURE B
START/RUN
Turn
TIMER
switch.
START/RUN
ON
Advertisement
Table of Contents
