ESI IVX C-Class Installation Manual page 38

Function 5: Integrated Answering Machine programming
Function 551: Station delivery options
Programming of the station options, as shown below, can be performed by the Installer or
Administrator. In addition, the user can change his phone number and pager number (but not phone
or pager delay time). The phone number's maximum length is 24 digits.
1.
Number
1. Phone 9725556789
2. Pager 9725551234
To program, enter 5 0 1 # (to select mailbox 501) and choose 1 for phone number or 2 for pager
number. Then, follow the prompts to set the parameters below.
1. Phone/pager number — The number to be dialed (without the CO line Group [9, 8 or 7]).
2. Delay — How many minutes the system is to wait before dialing the phone or pager number.
This allows the user to pick up a message if he is in the office.
Range: 0–500. Default: 0.
3. Attempts — How many times the system will call/page.
Range: 0–99. (0 turns off delivery.) Default: 3.
4. Interval — How many minutes should elapse between attempts.
Range: 1–1440. Default: 30.
5. Quiet period on — Phone only. When the quiet period should begin.
Default: (None.)
6. Quiet period off — Phone only. When the quiet period should end.
Default: (None.)
To insert a special code, press the right scroll key (▲) to select the desired special code: # ,
F or P. Press # to confirm the inserted character and continue. Press # # to complete the entry.
Use the down arrow key (▼) to backspace.
Once the number is saved you can use the scroll keys to move back and forth to view the
number. To edit the number, you must delete it and enter the correct number.
Function 552: Delivery/paging parameters
The sequence of programming is as follows:
1. CO line access — Enter the CO line group (9, 8, or 7) that is to be accessed for delivery.
Default: 9.
2. Pager dialing pause — When paging, the IVX C-Class system will send the mailbox number to
be shown in the pager's display. To allow time for the paging service to answer, enter the pause,
in seconds, to occur between when the IVX C-Class system dials the pager number and when it
then dials the mailbox number.
Range: 0–20. Default: 6.
G.2
2. 3.
Delay Attempts
30 6
0 10
Code What it produces
# # DTMF tone
DTMF tone
F Flash hook
P 2-second pause
IVX C-Class Installation Manual
4. 5.
Interval Quiet on
60 10:30PM
30
6.
Quiet off
7:15AM
,