System Programming Overview; Accessing Programming - ESI IVX C-Class Installation Manual

IVX C-Class Installation Manual

System programming overview

Here are the programming functions available on IVX C-Class with Integrated Answering Machine.
1 System parameters
11 Initialize
12 Installer password
13 Administrator password
14 System clock
141 Set time/date
142 Automatic time setting
15 System timing parameters
151 Flash duration
152 Transfer forward timer
153 Recall timers
16 System feature parameters
162 Connect tone
17 System speed dial
18 Maintenance/SMDR serial port baud rate
2 CO line programming
21 Line programming
22 Toll restriction programming
221 Centrex/PBX access code
222 Toll restriction exception tables
23 Line parameters
231 Line receive volume
232 Analog line disconnect
24 Caller ID programming

Accessing programming

You may program from any 24-Key Digital Feature Phone in the system:
1. Press PROG/HELP. The normal station programming menu prompt will begin to play. Press HOLD
to stop the prompt.
2. Enter the Installer password followed by # (The default password is 789).
You are now in programming mode (during this time, the extension will be automatically placed
in DND).
3. Follow the system programming menu to program as you wish; and, when finished, hang up.
Note: The system will automatically exit programming mode after 10 minutes of inactivity.
Example: If your Installer password is 864, enter programming mode by pressing PROG/HELP HOLD 8 6 4
#. (To exit programming mode, hang up.)
System programming: An introduction
3 Extension programming
31 Extension definition and routing
32 Extension feature authorization
33 Department programming
35 Extension button mapping
5 Integrated Answering Machine programming
54 Answering Machine Member
55 Message notification options
6 Recording
63 MOH programming
631 MOH source
632 MOH volume
C.3