Function 17: System Speed-Dial; Function 18: Maintenance/Smdr Serial Port Baud Rate - ESI IVX C-Class Installation Manual

Function 1: System parameters

Function 17: System speed-dial

Up to 100 system speed dial names and associated numbers can be stored, in location numbers 600–699,
for access by any station. A user can initiate a system speed-dial by dialing the speed dial location number
or by accessing the name through the Esi-Dex feature. In Function 32, access to system speed-dial can
be denied to individual stations (see page F.4).
Note: System speed-dialing overrides toll restrictions (Function 32, page F.4).
1. Enter the 3-digit location number to program,
2. Enter a ten-character name (see "Entering alphanumeric characters," page C.2).
3. Enter the number to be dialed (including the line group 9, 8, or 7). Press the left scroll key (▼) to
delete any character or digit entered in error. Here's an example:
The number dialed in Step 3 can be up to 30 digits long including the following special codes:
To insert a special code, press the right scroll key (▲) to select the desired special code: # ,
Press # to confirm the inserted character and continue. Press # # to complete the entry. Use the down
arrow key (▼) to backspace. Once the number is saved, you can use the scroll keys to move back and
forth to view the number. To edit the number, you must delete it and enter the correct number.
Example: To create a System Speed Dial number that dials 9, then 972-555-5644, then pauses for
four seconds and finally dials #104, enter:
9 9 7 2 5 5 5 5 6 4 4 (then scroll to) P # (then scroll to) P # (then scroll to) # # 1 0 4 #
Deleting a speed-dial number
To delete an entire speed-dial number and name, delete the location number (6 X X) by pressing HOLD
or the left scroll key (▼) during Step 1 in the speed-dialing procedure described above.

Function 18: Maintenance/SMDR serial port baud rate

The Maintenance/SMDR serial port
continously outputs real-time SMDR call records to the port. (See also "SMDR," pp. I.1–I.2.)
1. The system will prompt you for the baud rate. You can change this rate by pressing the scroll keys
( and ).
Options: 300, 1200, 2400, 4800, 9600, 19200 or 38400 bps.
Default: 38400.
2. Select the SMDR format, STANDARD or CSV, by pressing the scroll keys (
Default: STANDARD.
1
The port is called "Maintenance/SMDR" because IVX C-Class shares its cabinet design with other IVX models, on which a PC
can be connected to the port for on-line maintenance (programming and software upgrades).
D.4
1.
Speed Dial #
601 AUTO RENTL
Code What it produces
# # DTMF tone
DTMF tone
F Flash hook
P 2-second pause
1
is located on the side of the system cabinet. The system
IVX C-Class Installation Manual
2. 3.
Name Number
915552221212
, F or P.
and ).