Entering Alphanumeric Characters; System Fixed Numbering Plan - ESI IVX C-Class Installation Manual

System programming: An introduction

Entering alphanumeric characters

You enter names for extensions, departments, and branch IDs by pressing the dial pad key that
corresponds to the character to be entered. The key's possible entries will change each time the key is
pressed, and the display will show this. When the desired character appears on the display, press # to
confirm; the cursor will move to the next character position. You may move the cursor left (to correct
an entry) by pressing the left scroll key (▼) or move right (to add a space) by pressing the right scroll
key (▲).
Key Options
0 0, - (hyphen), _ (underline)
1 Q, Z, 1, "_" (space)
2 A, B, C, 2
3 D, E, F, 3
4 G, H, I, 4
5 J, K, L, 5
6 M, N, O, 6
Example: To enter a B, press 2 twice (the possible options to scroll through are A, B, C and 2). When B is
displayed, press # to confirm; the cursor will move to the next character to be entered. To complete
the name, press # #.

System fixed numbering plan

C.2
Numbers Function
0 Operator
1–6 CO lines
100-111 Digital extensions
112-113 Analog extensions
199 Overhead paging port
290–299 Department numbers
501 Integrated Answering Machine mailbox
560–580 Feature codes
590–593 MOH recordings
600–699 System speed-dial
IVX C-Class Installation Manual
Key Options
7 P, R, S, 7
8 T, U, V, 8
9 W, X,Y, 9
▼ (left Backs up and erases
scroll key)
▲ (right Adds a space
scroll key)
# [Enter]
# # Ends the name