Wan Link Status & Setup; Restore Default / Restart System; Firmware Upgrade - Intellinet 524537 User Manual

4-port broadband router

Table of Contents

3.8.5 WAN Link Status & Setup

WAN Link Setup — Select the desired mode from the drop-down menu, which will then dis-

play to the right of "WAN Link Status." The default setting is "Auto."

Apply — Click "Apply," then "Save" to set and save any changes.

Restore Default — Click to restore the router's configuration to its factory default settings. The

router will present a confirmation message, then restart automatically.

Restart System — Click to reboot the router.

To upgrade the firmware of your router, you need to download the firmware file to your local

hard disk.

New Firmware File — Enter the firmware file name or click "Browse" to locate it on your PC.

Table of Contents