Using The Small Form Factor Computer In A Minitower Configuration - HP Compaq d530 SFF Hardware Reference Manual

Hardware Upgrades
Using the Small Form Factor Computer in a
Minitower Configuration
✎
2-2
The Small Form Factor computer can be used in either a minitower or
desktop configuration. To use it in the minitower configuration, you
must purchase a tower stand from HP (part number 316593-001).
If the computer is in the desktop configuration, ensure at least 4
inches (10.2 cm) of space on all sides of the computer remains clear
and free of obstructions.
To install the tower stand:
1. Align the hole at the base of the computer with the post and
thumbscrew in the stand 12.
2. Tighten the screw to secure the computer to the stand 3. This
adds stability and helps to ensure proper airflow to the internal
components.
www.hp.com Hardware Reference Guide