Removing The Agp Card - HP d530 Small Form Factor Reference Manual

Removing the AGP Card

A 1.5V low profile Accelerated Graphics Port (AGP) card may be installed in the
AGP slot on the system board. To remove the AGP card from the AGP slot:
1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the
lock.
2. Turn off the computer properly through the operating system, then turn off any
external devices.
3. Disconnect the power cord from the power outlet and disconnect any external
devices.
4. Remove the computer access panel.
5. Locate the AGP card on the system board.
6. Lift up the slot cover retention latch that secures the AGP card.
Hardware Reference Guide
Hardware Upgrades
2-17