Routine Computer Care and Shipping Preparation
Optical Drive Precautions
Be sure to observe the following guidelines while operating or cleaning the optical
drive.
Operation
Do not move the drive during operation. This may cause it to malfunction during
reading.
Avoid exposing the drive to sudden changes in temperature, as condensation amy
from inside the unit. If the temperature suddenly changes while the drive is on,
wait at least one hour before you turn off the power. If you operate the unit
immediately, it may malfunction while reading.
Avoid placing the drive in a location that is subject to high humidity, extreme
temperatures, mechanical vibration, or direct sunlight.
Cleaning
Clean the panel and controls with a soft, dry cloth or a soft cloth lightly moistened
with a mild detergent solution. Never spray cleaning fluids directly on the unit.
Avoid using any type of solvent, such as alcohol or benzene, which may damage
the finish.
Safety
If any object or liquid falls into the drive, immediately unplug the computer and have
it checked by an authorized HP service provider.
G-2
Hardware Reference Guide